Tips for purchase

About Remote monitoring
If you want to remotely monitor temperature and humidity, you need to link the sensor to Tuya Bluetooth gateway or Tuya Zigbee multimode gateway.
If the mobile phone Bluetooth link sensor is used, the sensor has no remote monitoring or linkage function.
If the mobile phone is directly connected, some Android phones need to turn on the GPS function (low-power Bluetooth is included in the GPS function)

About Update Frequency
1. The sensor uses a trigger mechanism. When the temperature or humidity changes to the set value, the sensor will report the data immediately. Generally, the data is updated once an hour.
2. The sensor cannot set the update report data frequency.
3. The sensor cannot set alarm. The alarm function is set on the APP.
If you need to update data in real time, please purchase a USB powered version(TH06/TH16).
NOTE: This function needs to be supported by Tuya Bluetooth gateway or Tuya Zigbee multimode gateway. It is no use to directly link the mobile phone to the sensor.

Error on temperature and humidity
1. All temperature and humidity sensors will have certain errors, please note. The temperature error of this sensor is ± 1 ℃, and the humidity error is ± 5% RH. Any value within this range is normal.
2. The sensor error and manufacturing process will meet, and there will also be some errors between products of the same model.
3. According to Newton's third law, heat conduction takes a certain time. The sensor needs 30 minutes or 1 hour to be consistent with the room temperature, and the measurement will be accurate.

Historical curve of temperature and humidity
1. The minimum granularity of historical data (daily chart) is 1 hour, and the minimum granularity of exported data is also 1 hour.
2. Days of historical data are stored for 7 days.
3. The value of historical data is the average value. That is, the average value of a minimum granularity time.

Support for third-party smart speakers
1. Because the third-party smart speakers (Google Home/Amazon Alexa) do not have control panels corresponding to temperature and humidity sensors,
Therefore, the APP of third-party smart speakers may not display the temperature and humidity correctly.
But we have developed voice query function. Therefore, the current temperature and humidity can be queried by voice
2. Route or automatic process related to temperature and humidity cannot be established on the third-party smart speakers.
3. The device does not support Yandex Alice.
NOTE: This function needs to be supported by Tuya Bluetooth gateway or Tuya Zigbee multimode gateway. It is no use to directly link the mobile phone to the sensor.

Trigger mechanism of temperature and humidity in automatic process
We used Edge Triggered (ET)
That is, the action can only be triggered if the condition crosses the set condition.
A: For example, turn on the light when the automatic setting temperature is greater than 25 ℃.
A.1. When the temperature rises from below 25 ℃ to 25 ℃, the automatic process can trigger the ON light.
A.2. After the automatic process is set, the temperature is always above 25 ℃, and the lamp is not turned on.
B: For example, when the automatic setting temperature is less than 20 ℃, turn on the light.
B.1. When the temperature drops from above 20 ℃ to 20 ℃, the automatic process can trigger the start lamp.
B.2. After the automatic process is set, the temperature is always below 20 ℃, and the lamp is not turned on.
NOTE: This function needs to be supported by Tuya Bluetooth gateway or Tuya Zigbee multimode gateway. It is no use to directly link the mobile phone to the sensor.

When will the battery consume quickly
1. The correct type of battery is not selected, or the battery is mixed.
2. The sensor shall be installed at the location where the ambient temperature or humidity changes dramatically. In this environment, the device will frequently start the network to report data.
3. The sensor is installed in a low temperature environment for a long time (such as less than 0 ℃), and the battery performance will decline rapidly at this temperature.
4. The sensor is installed at a location where the network signal is very poor. When the network signal is poor, the equipment will increase the transmission power of the signal, resulting in increased power consumption.
5. The equipment is in a high humidity environment for a long time, which will corrode the battery and cause battery leakage.

Product Features:

1. High precision.
The sensor uses top suppliers. It can guarantee the high precision of the measurement data.

2.Intuitive Comfort indeicator
When you are not aware of the slightest changes in the weather, sensitive children and the elderly may already be cold, using intuitive expression to help you easily understand the comfort level.

3. Real-time monitoring and recording.
The sensor will monitor the temperature and humidity in real time. You can view the changes on the screen.
Record the temperature and humidity histry on the APP, and use the graphics to show you.

4. APP local Monitoring
Via APP(Smart Life or Tuya Smart) you can monitor temperature and humidity on the APP, But it must be within the range of the bluetooth link.

5. APP Remote Monitoring
If it is linked to tuya's bluetooth gateway, you can monitor temperature and humidity on the APP any where.

6. Scene linkage
The sensor can be used as the temperature and humidity data source of Tuya Smart, Smart Life, Amazon Alexa, Google Home. You can do many automated processes based on the data source.
NOTE:This function requires Bluetooth gateway support.

7. Third-party voice support.
The sensor supports Amazon Alexa, Google Home Asistant. You can check the current temperature and humidity by voice.
NOTE:This function requires Bluetooth gateway support.

About Rmote Monitor

To achieve remote monitoring and automatic configuration, our products need Tuya Bluetooth gateway or Tuya multi-mode gateway support.